To set up the AutoApply CV Chrome extension, create a free account, finish your profile, upload a resume, install the AutoApply CV LinkedIn Copilot from the Chrome Web Store, pin it to the toolbar, fill your answer bank once and then start a small run from the dashboard. Most problems after that fall into five buckets: the dashboard cannot see the extension, LinkedIn shows red field errors, the run gets stuck on the same page, outcomes do not appear in your tracker, or saved answers are not being used. This guide walks through setup in order and then gives the fix for each of those buckets.
One scope note before you start: the extension works on LinkedIn Easy Apply jobs. Jobs that send you to a company careers site are recorded as skipped so you can apply to them yourself.
Setup in five steps
1. Create an account and complete your profile
Sign up at /signup and fill the basics: name, phone, current city, total experience and notice period. These are not decoration. Easy Apply forms ask for a phone number and city on almost every job, and many Indian employers ask for notice period on the first screen. If the profile is empty, the extension has nothing truthful to put into those fields and the run will pause more often.
2. Upload a resume
Upload a PDF, DOCX or TXT file up to 5MB, or build one in the resume builder. Use the version you would be comfortable sending to every role in your target list. If you apply to two different role families, such as backend and data engineering, keep the run focused on one family at a time rather than using a resume that tries to cover both.
3. Install and pin the extension
Install the AutoApply CV LinkedIn Copilot from the Chrome Web Store, then click the puzzle-piece icon in Chrome and pin it. Pinning matters because it keeps the extension visible, so you can see at a glance that it is installed and active. Stay logged in to both LinkedIn and autoapplycv.in in the same Chrome profile. If you use several Chrome profiles (work and personal, for example), the extension, your LinkedIn session and your dashboard login all need to live in the same one.
4. Fill the answer bank once
The answer bank holds the replies to screening questions you see again and again: expected salary range, work authorization, willingness to relocate, years of experience with specific tools. Fill it before your first run. When a question comes up that the bank cannot answer truthfully, the extension pauses instead of guessing, and the question appears as a pending question in the dashboard.
5. Set targets and start small
On the LinkedIn auto-apply page of the dashboard, set target job titles, locations and work mode (remote, hybrid or on-site). Start with a modest daily limit, watch the first few applications, and open the applications tracker afterwards to check what was submitted, skipped or paused. On the free plan you get 3 auto-apply actions per day, which is a sensible size for a first test anyway. You can read more about the overall flow on How it works.
Troubleshooting the five common problems
The dashboard says the extension is not detected
- Confirm the extension is installed from the Chrome Web Store and enabled on the chrome://extensions page.
- Pin it to the toolbar.
- Reload the dashboard tab. The dashboard checks for the extension when the page loads, so a tab opened before installation will not see it.
- Check that the dashboard shows the installed version number. If it does not, make sure you are in the same Chrome profile where the extension is installed.
Red field errors inside Easy Apply
A red outline under a field means LinkedIn rejected the value. Typical causes are a decimal in a whole-number field, an empty required dropdown, or a text answer that is too long. The run pauses on that job rather than submitting something broken. Open the pending questions in the dashboard, enter a corrected answer, save it, and resume. Paused jobs are not charged against your daily allowance. If the same field keeps failing, see our guide to fixing date, number and upload errors.
Stuck jobs or the same page repeating
If the extension keeps opening the same job or cycles through one results page, it is usually working from stale search state. Update the extension to the latest version from the Chrome Web Store, then reset the run from the dashboard so it starts with a fresh job selection. Changing your search terms or filters and starting again also clears the old state.
Applications not showing in the tracker
The extension queues outcomes and imports them into your dashboard. If you ran it while the dashboard was closed, or your session on autoapplycv.in had expired, results can sit in that queue. Open the dashboard once while logged in and leave it open for a moment so the extension can flush the pending queue. Then check the applications tracker again.
Saved answers are not being used
Answers you type in the dashboard need to reach the extension settings. Save them in the dashboard first, then sync them to the extension. If an answer still is not used, check that the question wording matches. "How many years of experience do you have with Python?" and "Years of Python experience" may need the same answer saved against both phrasings.
Quick checks before you contact support
- Same Chrome profile for LinkedIn, the dashboard and the extension.
- Latest extension version installed.
- Dashboard reloaded after any install or update.
- The job actually shows an Easy Apply button, not just "Apply" with an external link.
- Your daily free allowance has not run out. It resets at 00:00 UTC, which is 5:30 AM IST.
If all of those check out and the problem continues, write in through the contact page with the job URL and a description of what the extension showed at the moment it stopped. That pair of details is what support needs to reproduce the issue.
Next step
Do one supervised run today: three Easy Apply jobs, dashboard open in another tab, and the applications tracker checked at the end. If all three end as submitted or as clearly explained skips, your setup is working and you can expand your search with confidence.
